Safety Instructions; Double Insulation; Important - Haussmann DB6107E12 Manuel De L'utilisateur

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS
RULES FOR SAFE OPERATION
The purpose of safety is to attract your attention
to possible dangers. The safety symbols and
the explanations with them, require your
careful attention and understanding. The safety
warnings do not by themselves eliminate any
danger. The instructions of warnings they
give are not substitutes for proper accident
prevention measures.
SAFETY ALERT SYMBOL indicates caution or
warning, may be used in conjunction with other
symbols or picture.
WARNING: Failure to obey a safety
warning can result in serious injury
to you or to others. Always follow the safety
precautions to reduce the risk of fire, electric
shock and personal injury.

DOUBLE INSULATION

Double insulation is a safety concept for electric
power tools, which eliminates the need for
earth grounding. Whenever there is electric
current in the tool there are two complete sets
of insulation to protect the user. All exposed
metal parts are isolated from the internal motor
components with protecting insulation.
WARNING: The double insulated system
is intended to protect the user from shock
resulting from a break in the tools internal
wiring. Observe all normal safety precautions
related to avoiding electric shock.
IMPORTANT: Servicing of a tool with double
insulation requires extreme care and knowledge
of the system and should be performed only
by a qualified service technician. For servicing
we suggest you return the tool to your nearest
Authorized Service Centre for repair. When
servicing, use only identical replacement parts.
WARNING: Do not attempt to operate this tool
until you have read thoroughly and understood
completely, safety rules, etc. contained in this
manual.
1. KNOW YOUR TOOL. Read owners
carefully. Learn its applications and limitations
as well as the specific potential hazards
related to this tool.
2. GUARD AGAINST ELECTRICAL SHOCK
BY PREVENTING BODY CONTACT WITH
GROUNDED SURFACES. For example, pipes,
radiators, ranges, refrigerator enclosures.
3. AVOID DANGEROUS ENVIRONMENT. Don't
use power tools in damp or wet locations or
expose to rain.
4. KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
5. KEEP AWAY FROM OVERHEAD ELECTRIC
POWER LINES. Keep a safety distance of 50'
(15 m) away from overhead electric-power
lines.
6. KEEP CHILDEREN AND VISITORS AWAY.
Visitors should wear safety glasses and be
kept a safe distance of 50' (15 m) from work
area. Do not let visitors contact tool or cord.
7. STORE IDLE TOOLS. When not in use, tools
should be stored in a dry place, out of reach
of children.
8. DON'T FORCE THE TOOLS. It will do the job
better and safer at the rate at which it was
designed.
9. DRESS PROPERLY. Do not wear loose
clothing or jewelry. They can be caught in
moving parts. Rubber gloves and non-skid
footwear are recommended when working
outdoors. Also wear protective hair covering
to contain long hair.
10. ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses have only impact resistant lenses,
they are not safety glasses.
11. PROTECT YOUR HEARING. Wear hearing
protection during extended periods of
operation.
12. PROTECT YOUR HEAD. Wear a safety helmet
while trimming overhead branches or for
any work where the cut piece can fall onto
manual
EN
25