Advanced Features - Sage the Dual Boiler Guide Rapide

PAGE HEADER..... OPERATING YOUR NEW APPLIANCE

ADVANCED FEATURES

Pre-Infusion Programming
With machine in STANDBY mode, press
UP and DOWN arrows together to enter
Pre-Infusion programming mode.
Press MENU button to move between
Pre-infusion Duration and Power.
Pre-Infusion Duration
The LCD will display the current
Pre-Infusion Duration.
Press UP or DOWN arrow to vary time.
We recommend a range of between
5 - 15secs as being optimum.
Pre-Infusion Power
The LCD will display current Pre-Infusion Power.
Press UP or DOWN arrows to vary power.
We recommend a range of between 55–65
as being optimum. Press EXIT to confi rm setting
and return to STANDBY mode.
16
ALERTS
STEAM LED Flashing At START UP
The machine will not enter START UP mode
when the STEAM LEVER is in the OPEN
position and the STEAM LED is fl ashing.
Move the STEAM LEVER to the
CLOSED position for the machine
to enter START UP mode.
HOT WATER LED Flashing At START UP
The machine will not enter START UP mode
when the HOT WATER dial is in the OPEN
position and the HOT WATER LED is fl ashing.
Move the HOT WATER dial to the
CLOSED position for the machine to
enter START UP mode.
HOT WATER LED Flashing
The HOT WATER LED will fl ash when the HOT
WATER function has been operating for longer
than 1 minute.
Move the HOT WATER dial to CLOSED position
for machine to enter STANDBY mode.
Fill Tank
The machine will detect a low water level. The FILL
TANK icon will be displayed on the LCD screen.
If FILL TANK icon is displayed, add
water to tank until machine returns to
STANDBY mode.