Troubleshooting - Ninka Qanto Id A5 Mode D'emploi

11. Troubleshooting

Lifting system does not work
• The lifting system does not move down.
• The trays do not sit in place properly.
• No power supply.
• The fuse has tripped.
• The control element does not respond.
• The control element is defective.
• The lifting system is defective.
Lighting does not work
• No power supply.
• The fuse has tripped.
• The cable connections are loose.
• The light is defective.
Socket does not work
• No power supply.
• The fuse has tripped.
• The cable connections are loose.
• The socket is defective.
Control element does not work
• The control element does not respond.
• No power supply.
• The fuse has tripped.
• The cable connections are loose.
• The control element is defective.
Unusual noises or odours
Service-Telefonnummer (amerikanische Nummer)
E-Mail-Adresse
Qanto_Id_A5_ 0000.50.65062-US
► Check the setting of the safety switches
according to the assembly instructions.
► Check the position of the trays.
► Check the mains plug.
► Check the fuse.
► Clean the control element.
► Contact the specialist dealer or customer service.
► Contact the specialist dealer or customer service.
► Check the mains plug.
► Check the fuse.
► Check the cable connections.
► Call the specialist dealer or customer service.
► Check the mains plug.
► Check the fuse.
► Check the cable connections.
► Call the specialist dealer or customer service.
► Clean the control element.
► Check the mains plug.
► Check the fuse.
► Check the cable connections.
► Call the specialist dealer or customer service.
► End the lifting procedure.
► Pull the mains plug.
► Call the specialist dealer or customer service.
EN
33