Ninka Qanto Id A5 Mode D'emploi page 17

EN
3.
1x 360°
Step 3:
Loosen the 4 screws with a socket head
screwdriver 7/64" (3 mm) by a 360°
turn.
Tray carrier
Step 4:
You can now move in the middle tray by
about ± 1.96" (± 50 mm).
4.
Step 5:
Retighten the 4 screws with a socket
head screwdriver 7/64" (3 mm).
5.
17
Qanto_Id_A5_ 0000.50.65062-US