hajdu HP-TOWER HPT200C Manuel De Mise En Service, D'opération Et D'entretien page 84

HPT 200 • HPT 200C
Warning
Wear individual protective clothing and
8.
equipment during each work phase.
Each operation inside the appliance should be
9. performed with due caution taking care to avoid
sudden contact with sharp parts.
Before moving the appliance, discharge all parts
10. that may contain hot water by performing full
water discharge, if necessary.
Use cables of adequate cross section for all electric
11.
connections.
Ensure protection of all areas surrounding the
12. appliance and the work area using adequate
materials.
Handle the appliance carefully, using appropriate
13.
protection tools.
Organize all materials and equipment in a way
ensuring easy and safe handling, and avoid the
14.
accumulation of materials that may lead to their
falling down or tumble.
Set all safety and control functions aff ected by any
work performed on the appliance in their default
15.
state, and make sure that they operate properly
before re-starting the appliance.
84
Danger
Personal injuries caused by electric shock,
falling chips or shatters, dust inhalation,
vibration, wounds and bruises caused by
cutting or stabbing, injuries caused by
noise or vibration.
Personal injuries in the form of wounds
and bruises caused by cutting or stabbing.
Burn marks.
Fire caused by overheating as a result
of electric current fl owing through
undersized wires.
Damage to the appliance or surrounding
objects caused by falling chips, hitting or
cutting.
Damage to the appliance or surrounding
objects caused by vibration, hitting, cutting
or breakage.
Damage to the appliance or surrounding
objects caused by vibration, hitting, cutting
or breakage.
Damage to or shutdown of the appliance
caused by irregular operation.