Publicité
Les langues disponibles
Les langues disponibles
Untitled-8 25
2. While pressing the hinge shaft down,
position the door so that the hinge shaft
is below the shaft hole in the middle
hinge. Release the hinge shaft so that it
enters the shaft hole.
3. With the door open, connect the bottom
connectors in the direction of the
arrows.
4. Attach the levelling foot cover using
a Phillips head screwdriver. Be
careful not to damage or step on the
connectors.
5. Repeat the steps above for the other
door.
English 25
2018-08-27
4:44:59
Publicité
