Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN PULSE - Mode d'emploi / User guide version V1.6.1
•
A short description of the application
1. LoRaWAN PULSE
NB: Starting the LoRaWAN PULSE unit can only be done with a magnet.
Description
•
ADEUNIS RF's LoRaWAN PULSE is a ready to use radio transmitter that can be used to transform any type of meter into a wireless meter
(smart meter).
•
Connection to meters (water, gas, electric, heat) is simple via a system that is compatible with pulse interfaces. Configuration is intuitive via
mechanical switches.
•
Two meters may be controlled by a single Adeunis RF LoRaWAN PULSE transmitter thus permitting a significant reduction in implementa-
tion and deployment costs.
•
An embedded application is used to adjust the data transmission cycle and alerts concerning fraud.
•
This document contains essential recommendations for the optimal implementation of ADEUNIS RF's LoRaWAN products. Following these
recommendations will enable you to obtain communication over the distances advertised by the manufacturer according to the model
chosen.
•
LoRaWAN PULSE transmitters use a Lithium battery guaranteeing a product life in excess of 10 years under normal conditions of use.
IMPORTANT NOTE: The LoRaWAN PULSE is delivered with an OTAA default configuration, allowing the user to declare its product to a
LoRaWAN network operator. If the ABP procedure is needed, please contact the sales department with relevant information.
Composition of the package
The product is delivered in a cardboard package containing the following items:
•
The upper casing, the electronic board, and the casing base.
•
The packing gland nut,3 packing gland seals, 2 CBLZ 2.2 x 19 mm screws, and 2 Fischer SX4 wall plugs.
Casing base
Antenna
2 holes for
passing collars
through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page
26
of 41
Publicité
Table des Matières
