Operation - Bartscher 190128 Mode D'emploi

Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid specification should
be compared with that of the device (see rating plate). Connect the device
only in case of compliance!
Connect the device only to properly installed single socket with
protective terminal.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

5.2 Operation

•
Wash the device thoroughly prior to first use (see section 6 „Cleaning").
•
Place the device's base on a table. The table
surface must be temperature resistant, dry,
flat and stable.
•
Place the container on the base to that the
lower controller is inserted into the appropriate
openings in the base.
Frothing milk
•
Open the plastic lid and mount the milk frothing
7
whisk ( ) to the bottom of the container.
NOTE!
It is not necessary to heat the milk thanks
to the integrated hearing function.
•
Pour fresh, cold milk into the container, up to the
lower „MAX" marking 1, fig. on the right.
2
1
- 25 -