i-tec CATRIPLEDOCKVGAPD Mode D'emploi page 9

HARDWARE INSTALLATION (CONNECTING THE DOCK TO THE MACBOOK)
1) Turn on your MacBook and connect the power adapter to the dock.
2) Plug the power adapter of the docking station into the AC 110 V / 230 V
mains and press the ON button.
3) Plug the USB-C cable into the USB-C port on the side panel of the dock. Use
the USB-C to USB-A adapter to plug into the USB-A port of your laptop/tablet.
4) Plug the other end into a free USB 3.0 / USB-C port on your MacBook.
5) The automatic installation of the ports will then begin.
6) After the installation is complete, restart your MacBook.
The installed ports are shown in Mac OS X as "USB-C Triple-4K Dock" in "About This
Mac"  "System Profiler"  "Hardware"  "USB".
Quick Start / USB 3.0/USB-C/Thunderbolt, 3x Display Docking Station / English
Installing Drivers in Mac OS X
Viewing the dock on macOS
EN | 9