Specifications
Further Data
Ambient temperature
Design
Installation position
Diameter of the test jacks
Degree of protection
Ambient conditions
Mounting
Weight
Operation:
-25 ... 70 °C (min. start temp.: -40 °C)
Operation with passive output:
-25 ... 60 °C
Transport and storage:
-40 ... 85 °C
Modular housing with screw terminals
Housing width 17.5 mm
Vertical or horizontal
2.1 mm
Housing: IP 40, terminals: IP 20
Stationary use, indoor use
Relative humidity 5 ... 95 %,
no condensation
Barometric pressure: 750 ... 1060 hPa
Altitude up to 2000 m;
The permitted working voltages are
reduced at altitudes > 2000 m.
With snap-on mounting for 35 mm
DIN rail according to EN 60715
Approx. 120 g
65