Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Code
OC
LC, LC1
3C
HC
1C
AC
AC6
DC1
FC
9C1
94
English
Untitled-1 94
Water has overflowed.
• Restart after spinning.
• If the information code remains on the display, contact a local Samsung
service center.
Check the drain hose.
• Make sure the end of the drain hose is not placed on the floor.
• Make sure the drain hose is not clogged.
• If the information code remains, contact a customer service center.
Check the drum motor for operation.
• Try restarting the cycle.
• If the information code remains, contact a customer service center.
High temperature heating check.
• Clean the lint filter.
• If this information code remains, contact a Samsung service center.
The Water Level sensor is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
Check communications between main and sub PBAs.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
Check communications between the main and the inverter PBAs.
• Depending on the state, the machine may automatically return to normal
operation.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
The Main Door lock/unlock is not working properly.
• Turn the machine off, and restart the cycle.
• If the information code remains, contact a customer service center.
Invalid power source frequency
• Try restarting the cycle.
• If this continues, call for service.
The electronic control needs to be checked.
• Check if power cord is connected properly.
• Check if the electrical outlet is working properly.
• If this continues, call for service.
Action
2023-12-18( )
5:49:41
Publicité
