Publicité
Les langues disponibles
Les langues disponibles
Installation
STEP 4 Connect the water hose
34
English
Untitled-1 34
CAUTION
• Make sure to use new water hoses and that rubber
gaskets (B) are inside the couplings (A) at both ends
of the hoses. Water hoses without the gaskets may
leak.
• Allow 5 in. (127 mm) of space between the back of
the Laundry Hub and the wall to prevent water hoses
from being kinked. Kinked hoses may cause water
leaks.
• If there is a water leak, stop using the Laundry Hub
B
and contact a local Samsung service center. A water
leak may cause electric shock.
• Do not stretch the water hoses by force. If a hose is
too short, replace the hose with a longer hose.
A
1. Attach the water hoses to the hot and cold water
taps, and then hand tighten the water hose fittings
until they are tight. Then, use pliers to tighten the
fittings by an additional two-thirds of a turn. To avoid
damaging the fittings, do not overtighten them.
2. Pull the water hoses to check if they are firmly
connected.
2023-12-18( )
5:49:26
Publicité
