LG CBIS3618BE Manuel D'utilisation page 39

en-us_main.book.book Page 39 Tuesday, October 17, 2023 9:43 AM
Problem
Error code FC, F1, or Electronic control has detected a fault condition.
F5 appears on the
• Turn the power off and then on again to turn off the error code.
display.
• If the issue recurs, call for service.
Wi-Fi
Problem
Trouble connecting The password for the Wi-Fi network was entered incorrectly.
appliance and
• Delete your home Wi-Fi network and begin the connection process again.
smartphone to Wi-Fi
network Mobile data for your smartphone is turned on.
• Turn off the Mobile data on your smartphone before connecting the appliance.
The wireless network name (SSID) is set incorrectly.
• The wireless network name (SSID) should be a combination of English letters and
The router frequency is not 2.4 GHz.
• Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and
The appliance and the router are too far apart.
• If the appliance is too far from the router, the signal may be weak and the connection may
During Wi-Fi setup, the app is requesting a password to connect to the product (on
certain phones).
• Locate the network name which starts with "LG" under Settings > Networks. Note the last
numbers. (Do not use special characters.)
connect the appliance to the wireless router. To check the router frequency, check with
your Internet service provider or the router manufacturer.
not be configured correctly. Move the router closer to the appliance or purchase and
install a Wi-Fi repeater.
part of the network name.
- If the network name looks like LGE_Appliance_XX-XX-XX, enter lge12345.
- If the network name looks like LGE_Appliance_XXXX, enter XXXX twice as your password.
For example, if the network name appears as LGE_Appliance_8b92, then you would
enter 8b928b92 as your password. In this instance, the password is case sensitive and
the last 4 characters are unique to your appliance.
TROUBLESHOOTING
Possible Cause & Solution
Possible Cause & Solution
39