Télécharger Imprimer la page

Inventum HNK153 Mode D'emploi page 17

Publicité

Les langues disponibles

Les langues disponibles

CAUTION
Please note that excessive washing will wear out the heat pad. For this reason, the heat pad should only be machine-washed a
maximum of 10 times throughout its entire life.
• Immediately after washing, reshape the heat pad to its original dimensions while it is still damp and spread it out flat over a clothes
drying rack to dry.
CAUTION
• Do not attach the heat pad to washing lines with washing pegs or similar. Otherwise the heat pad may be damaged.
• Do not reconnect the switch to the heat pad until the plug-in connection and the heat pad are completely dry.
Otherwise the heat pad may be damaged.
WARNING
Under no circumstances switch on the heat pad to dry it. Otherwise, there is a risk of an electric shock.
6
storage
If you do not plan to use the heat pad for a long period of time, we recommend that you store it in the original packaging. For this
purpose, disconnect the control from the heat pad by unplugging the plug-in coupling.
CAUTION
• Please allow the heat pad to cool down first. Otherwise, the heat
pad may be damaged.
• To avoid sharp folds in the heat pad, do not place any objects on
top of it while it is being stored.
7
disposal
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and
electronic equipment marked with the symbol indicating separate collection of such equipment must be returned to a
municipal waste collection point.
8
problems & solutions
Problem
The temperature settings are not illuminated while
- the control is fully connected to the heat pad;
- the supply plug is connected to the mains outlet with
correct function;
- the setting is 1, 2 or 3.
Cause
The safety system switched
off the heat pad irreversible.
Remedy
Send the heat pad together with the
control to the service department.
English
17

Publicité

loading