InovTech G2000i Notice D'utilisation page 29

G2000i Inverter Generator
10. Examine and repair the breakdown
If the engine can not be started:
Does the gasoline tank still have gasoline? → If not, fill gasoline into the gasoline tank.
↓yes
Is the switch of the generator on the "open" position？→ If not, switch on the engine.
↓yes
Is there enough machine oil in the engine? → If not, add enough machine oil
↓yes
Is there any spark outside the spark plug? → If not, change the spark plug → If not, send the generator to
the authorized agent.
Warning
Make sure that there is no gasoline spilling out of the spark plug. The overflowed
gasoline may catch fire.
Examination:
1 Dismantle the spark plug, clean out the filth around it.
2 Dismantle the spark plug, enclose it into the cover of it.
3 Earth the side pole on the lid of the air cylinder.
4 When you pull the starting hold, the spark must spray from the clearance.
↓yes
If the engine still can not be started, send the generator to the authorized agent.
If the engine can not be started:
Does the outputting indicator light lighten? → If not, fill gasoline into the gasoline tank
↓no ↓no
Does the overloading indicator light lighten?
↓ No
Examine whether the electrical equipment or installations have any breakdown? → If not, send the
generator to the authorized agent
No electric power in the direct current socket:
Is the defender of the direct circuit open? → If not, open the defender of the direct circuit
↓
→→→→→
If yes, send the generator to the authorized agent.
29