Publicité
Les langues disponibles
Les langues disponibles
7. Install the spark plug carefully by hand. Pay attention not to overlap the
screw thread.
8. After installing a new spark plug by hand, screw it with a spanner for a half
circle in order to press the washer tightly. If an old spark plug is installed, you
only need to screw it from one eighth circle to one fourth circle after it is fixed.
9. Re-install the cap of the spark plug.
10. Reinstall the repair cover of the spark plug.
Look out
The spark plug must be fixed firmly, or else it will become very hot and
damage the generator.
Do not use the spark plug whose thermal measurement range is not
suitable.
G2000i Inverter Generator
26
Publicité
