Hansgrohe Axor Montreux 16570 1 Série Instructions De Montage / Mode D'emploi / Garantie page 18

1
¼"
2
18
English
Terrano only
From the center line of the valve, measure up the wall
⅜".
Mark the positions of the two screw holes. They
should be 1⅜" apart, centered over the valve.
Drill the holes with a ¼" bit suitable for the wall
surface.
Install the anchors.
Seal the wall around the anchor
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Attach the mounting flange with the screws and
washers.
Install the escutcheon.