Urmet 2Voice 1760/18 Mode D'emploi page 17

The following
The LED on the
If the video door phone is configured in Local Power or Low rise block mode, it is possible to enable
the automatic door opener function with scheduling. Scheduling allows parameters to be configured,
e.g. a specific time and days, which control the function activation (for further details see the
configuration booklet
Press again to enable the automatic door opener function with scheduling.
The following
The LED on the
5.3 ACTIVATION OF THE VIDEO DOOR PHONE VOICEMAIL
(MASTER VIDEO DOOR PHONE ONLY)
This function enables the automatic recording of a video clip following a call. The duration of the video clip
is 10 seconds.
On the homepage, select the
function.
The following
To disable the video door phone voicemail, repeat the procedure described above.
ATTENTION! If the call forwarding function has been enabled on the video door phone, confirming
selection on the
forwarding function
Forwarding Function").
5.4 CONSULTING VIDEO CLIPS (MASTER VIDEO DOOR PHONE
ONLY)
ATTENTION! If the call forwarding function has been enabled on the video door phone, it will not be
possible to consult the video clips on the video door phone voicemail.
All recorded video clips are available on the video door phone voicemail. If there is at least one video clip
that has not been viewed, a red dot will appear on the icon on the homepage as a notification symbol.
If there are new video clips, the LED on the
standby mode.
On the Homepage, select the
voicemail.
DS1760-040A
icon is displayed to confirm that the parameter has been changed.
key starts flashing green when the video door phone is in standby mode.
in chapter "Automatic Door Open Timing").
icon is displayed to confirm that the function has been changed.
key starts flashing fast in green when the video door phone is in standby mode.
icon and press the
icon is displayed to confirm that the parameter has been changed.
icon will disable the video door phone voicemail function and enable the call
(for further details see the
icon and press the
key to enable the video door phone voicemail
Parameter configuration booklet
key flashes green when the video door phone is in
key to access the video door phone
Parameter
in chapter "Call
17