Urmet 2Voice 1760/18 Mode D'emploi page 12

The display shows the following screen:
When conversation with the indoor station has been established, the LED of key starts flashing and if
the video door phone is in Local power mode the display shows the following screen:
By pressing the following , and keys it is possible to activate the respective function (for further
Button function).
details see chapter
Press the key again to terminate the call.
4.6. AUTO-ON FUNCTION
The auto-on function makes it possible to display on the video door phone the image taken from the call
stations in the system. When the video door phone is in STANDBY mode, press the
key to access
the FUNCTIONS status, then press the
key to display the image taken from the call station (the first
displayed image is the one from the main call station with ID 0); press the key again to switch to the
next call stations or to any control cameras. Press the key to enter into audio-video communication with
the displayed call station; pressing the key a second time disables the auto-on function. The auto-on
function cannot be carried out if the column is already engaged in a conversation; in this case, if you try to
activate the function, the video door phone will emit a dissuasion tone (4 beeps).
12
DS1760-040A