Publicité
Les langues disponibles
Les langues disponibles
USE
• Place the button on desired position to start the heater.
• Place the button to OFF position to turn off the heater.
Adjust the thermostat :
Choose Heating Power
(750W) or
(1500W).
An anti-tilt switch is located in the device, it automatically cuts off the power in the event of a fall or
movement of the device.
A thermal safety device automatically cuts the heating element in the event of overheating. In this
case, the fan continues to run to cool the device, and the appliance can re-start as soon as the normal
conditions and temperature needed for it to function are re-established.
CARE
• Use a soft, dry cloth.
• For persistent stains, use a cloth dampened with soapy water and wipe immediately with a dry cloth.
TROUBLESHOOTING
Malfunctions are often due to minor causes; please read the table below before contacting the after-sales service.
This can save you time and avoid unnecessary expenses.
Off
Fan without Heater
Fan with low Heater
Fan with high Heater
Place button on max
temperature.
40
40
40
40
40
40
40
30
30
30
30
30
30
30
20
20
20
20
20
20
20
10
10
10
10
10
10
10
0
0
0
0
0
0
0
-10
-10
-10
-10
-10
-10
-10
Wait until the
Turn slowly the button
desired room
until the appliance
temperature is
switches off (the
reached.
heating indicator goes
out)
53
Adjust the
thermostat
Adjust Power
Heating indicator
40
40
30
30
20
20
10
10
0
0
-10
-10
The appliance will heat
as soon as the room
temperature drops
to maintain this set
temperature.
EN
40
40
30
30
20
20
10
10
0
0
-10
-10
40
30
20
10
0
-10
Publicité
