Steam Dispensing - La Cimbali M39 GT R2 Utilisation Et Installation

17. Steam dispensing

Scalding hazard! Use the appropriate
insulating devices (A) to move the water and
steam wands.
Dispensing with the Turbosteam selector (13)
Machines equipped with the TURBOSTEAM (STOP STEAM)
dispensing system have the "stop steam dispensing when
set temperature is reached" function, and can rapidly heat
and froth milk.
The Turbosteam selector keys have different functions
TS4 frothed milk (high froth);
TS3 frothed milk (medium froth);
TS2 frothed milk (low froth);
TS1 heated milk;
steam.
NOTE: During the programming phase, the Turbosteam
differently according to different needs.
Insert the steam nozzle (9b) into a suitable container, making
sure the bulb is completely immersed in the milk.
Choose the type of milk you prefer and press the related key.
Once the set temperature has been reached, steam
dispensing will stop automatically.
Dispensing can be interrupted at any time by pressing any
Turbosteam selector key (13).
Steam dispensing with knob control
The steam frother system (20) is suitable for beverages that
opened.
Insert the steam dispensing wand (9) in a suitable container.
Open the steam and close it when the beverage is heated.
Cleaning of steam nozzles
At the conclusion of each steam dispensing
phase:
- using a clean sponge, wash with hot water
removing any organic residue present. Rinse
carefully.
- clean the inside of the steam nozzle as follows:
turn the nozzle towards the cup tray and
carefully activate steam dispensing at least
once.
COLD TOUCH
The new Turbosteam Cold Touch (9b) improves the
ease of use of the steam wand, thanks to an insulating
and non-stick coating that keeps it cold before, during and
after dispensing the steam, thus making it easy to handle
and clean.
16 EN
TS1
TS4
TS3
13
9b
20
9
TS2
A