Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
FEATURES
1. Control panel
2. Handles (both sides)
3. Water bucket
4. Water level indicator
5. Air outlet
6. Air fi lter
7. Continuous drain outlet
8. Power cord storage strap
9. Power cord storage band
10. Power cord
11. Pump drain outlet
1
2
3
4
INCLUDED ACCESSORIES
• Power cord storage band
• Pump drain hose (1pc)
• Drain hose (insulated) (1pc)
• Drain hose connector (1pc)
5
6
7
8
9
10
11
CONTROL PANEL
1. Auto defrost light: The light will illuminate when
frost builds up on the evaporator coils. The
compressor will cycle off and the fan will continue
to run until the frost melts.
2. Bucket full light: The light will illuminate when
the bucket is full or incorrectly positioned inside
the cabinet. The compressor and fan operation
will stop as a safety feature. When the bucket is
emptied or correctly re-positioned the dehumidifi er
will resume operation automatically.
3. Display: Shows the actual (± 5% accuracy)
room humidity level in a range of 30% to 90%.
Otherwise, displays selection when programming
humidity or timer.
4. Pump button: Press to activate the drain pump.
Ensure that a drain hose is connected before
starting the pump.
5. Smart dehumidify: This function will automatically
adjust the humidity level with the fl uctuating
room temperatures. The humidity level cannot be
adjusted in this setting, it will stabilize between
45% - 55%. Press the humidity adjust buttons to
cancel this feature.
6. Filter button: The check fi lter light will illuminate
after 250 hours of operation. After cleaning the
fi lter, press the fi lter button to turn off the light.
7. Continuous button: Press to activate the continuous
dehumidifying operation.
8. Fan button: Press to select normal or high fan
speed. The light will illuminate when set to high
fan speed.
9. Timer button: Press to set the timer.
10. Humidity adjust buttons: The humidity level can be
set within a range of 35% to 85% relative humidity
in 5% increments. For drier air, set to a lower
percentage value. For more damp air, set a higher
percentage value.
11. Power button: Press to turn the dehumidifi er on or
off.
1
4
5
6
7
3
2
3
8
9
10
11
Publicité
