Manual Storing Of Station Presets - Alpine CVA-1005 Mode D'emploi

1
2
3
4
36
1
2 3
1/2
PAGE
1 2 3 4
P.SET P.SET P.SET P.SET
1 2 3 4
P.SET P.SET P.SET P.SET
Radio Operation
Manual Storing of Station
Presets
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
AM or D.A.P.).
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
5 6
P.SET P.SET
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds until the Function Guide indicators
P.SET1 through P.SET6 in the display blinks
(for 5 seconds).
Press the Function button into which you wish
5 6
to store the station while the Function Guide
P.SET P.SET
indicators P.SET1 through P.SET6 in the
display are blinking (within 5 seconds).
The Function Guide indicators in the display
stops blinking, indicating that the station has
been memorized at the Function button pressed.
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
Note: If a preset memory has already been
set in the same Function button, it will
be cleared and the new station will be
memorized.
English