Basic Mode - Alpine CVA-1005 Mode D'emploi

1
6
8
"
$
216
2
3
4
ENT
5
A.PROC DEFEAT MUTE
VOICE N/H MP/RG
LIST DETOUR PLAN
TUNER
DISC CHG
!
V.SEL
POWER
DISP
DEL DEST.
ON/OFF
1 2
3
#
4 5 6
7 8
9
&
DEL 0 OK
%
Remote Control
(RUE-4165 supplied with CVA-1005)

Basic Mode

1 Remote Control Signal Transmitter
2 Signal Transmitter Indicator
3 Rotary Encoder/Volume Control
Rotate to the right or left in the same manner
as for the Rotary Encoder on CVA-1005.
4 NAVI/AUDIO Switch
NAVI:
AUDIO: Select this position to activate Audio
5 ENTER Button
• Press to execute the selection. (The same
function as the rotary encoder on CVA-
1005.)
• Pressing and holding this button for more
than 2 seconds turns the loudness on or off
(when neither an equalizer nor a digital
sound processor is connected).
7 :/J Button
Press and hold this button for more than 2
9
seconds to play or pause.
6 A.PROC (Audio Processor) Button
Switches the audio processor modes such
as equalizer, surround, etc.
7 MUTE Button
Press the button to lower the volume level by
20 dB instantly. Press the button again to
return to the previous volume level.
8 TUNER Button
Press the button to select the radio mode.
9 DISC Button
Press to switch to the CD/MD mode.
! CHG (Changer) Button
Press to switch to the changer mode.
" POWER Button
Press to turn the power On or Off.
# Numeral Keys
The key numbers from 1 to 7 have the same
∗
functions as for the 1 to FUNC buttons on
CVA-1005.
$ DEL (Angle Down) button
Pressing this button changes the monitor
angle downward.
% "O" (Open/Close) Button
• When the monitor is closed: raises the
monitor.
• When the monitor is open: houses the
monitor into the monitor compartment.
• When the monitor is open:each time you
press and hold the "O" (Open/Close) button
for more than 2 seconds, the monitor slides
back and forth.
& "OK" (Angle Up) Button
Changes the monitor angle upward.
* Not used.
Select this position to activate
Navigation mode.
mode.
English