Resetting The System - Alpine CVA-1005 Mode D'emploi

1
18
Basic Operation
Using Face Cover
An anti-theft face cover is provided with the
CVA-1005.
Put the face cover onto the CVA-1005 when
you leave the vehicle.
Be sure to remove the anti-theft face cover
when you drive.

Resetting the System

Immediately after installing or applying power to
the CVA-1005, it should be reset. If any optional
component such as a CD changer is added
1
after the initial installation, the unit should also
be reset. This will ensure the CVA-1005
recognizes the new component.
To the right side of the Rotary Encoder, there is
a small switch. Using a pencil or other pointed
object, press this reset switch to reset the unit,
then turn the power on to the unit.
Notes: • After turning the system off, a
slight ghost of the image will
remain temporarily. This is an
effect peculiar to LCD technology
and is normal.
• Under cold temperature condi-
tions, the screen may lose
contrast temporarily. After a short
warm-up period, it will return to
normal.
English