Alpine CVA-1005 Mode D'emploi page 100

1
FLAT
2
3
4
5
6
100
2 6
1
3 4 5
MALE FEMALE POPS ROCK
RETURN
RETURN
Audio Processor
Operation (Optional)
Creating Personal Equal-
izer Characteristic
Curves
You can create your own equalizer characteris-
tic curves. The following is the procedure.
Note: The Parking Brake must be engaged to
access the Equalizer Adjustment mode
screen. Attempting to access this screen
while driving will display the warning-
CAN'T OPERATE WHILE DRIVING.
Display the equalizer mode screen by pressing
NEWS
one of the Function buttons 1 (FLAT) through
6 (NEWS) to select the desired characteristic
curve you wish to change.
Press and hold the FUNC (RETURN) button for
at least 2 seconds.
The display changes to show the equalizer
adjustment screen .
Rotate the rotary encoder clockwise or
counterclockwise to select the frequency that
you wish to adjust. The color of the frequency
changes when it is selected.
Press the rotary encoder to execute the
selection.
Adjust the level to the desired level by rotating
the rotary encoder, then press the rotary
encoder.
Repeat the above steps to adjust other
frequencies.
When the adjustments have been completed,
press the FUNC (RETURN) button.
The display changes to the Equalizer mode
screen.
English