Kärcher WD 7.2 Serie Notice Originale page 16

17 Flat fold filter with frame
(already installed in the appliance)
Caution
Filters and their frames must always be in-
serted during operation.
18 Filter bag intake
Caution: Please do not dispose of!
Is hooked into the interior of the container,
is used to hold the filter bag.
19 Filter bag
Note: Do not use a filter bag for wet vacu-
uming!
Recommendation for appliances with-
out filter cleaning: To vacuum fine dust,
use the filter bag.
20 Suction hose with handle
21 Suction tubes 2 x 0.5 m
22 Floor nozzle
(with switching lever)
For vacuuming dust from hard surfaces and
carpets:
Lever on symbol
Lever on symbol
23 Crevice nozzle
24 Adapter
To connect the suction hose with an electric
tool.
25 Flexible tool hose
For more flexibility when working with elec-
tric tools.
Note: Can also be used with an adapter.
for carpets
for hard surfaces
Always work with an inserted flat
fold filter - during wet as well as dry
vacuum cleaning!
Before Startup
Illustration
 Remove the appliance head and take
the contents out of the container.
Illustration
 Turn the container, press in the swivel
casters in the openings at the base of
the container till the end-point.
Illustration
 Install the rear wheels: Break the
bearing halves apart and press the
large halves into the wheel pickup.
For appliances without axle: Place
the wheels into the wheel intake.
For appliances with axle: Attach the
wheels to the axle and place into wheel
intake.
Finally, hook the smaller halves into the
larger ones and screw them in.
Illustration
 Install the hook.
For appliances with pushing handle:
Illustration
 Insert the pushing handle into the two
respective openings in the appliance
head from above and press them down
all the way. Secure from below using 2
screws.
Note: If the pushing handle is removed
later on, the bottom openings must be
closed up with the two screws for func-
tional reasons.
A
Illustration
 Insert and lock the appliance head.
Illustration
 Connect accessories.
Illustration
 Plug in the main plug.
EN
– 3
Operation
6
Start up
15