System Startup; System Software - Clevo N650DU Guide Utilisateur Concis

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in
position.
4. Securely attach any peripherals you want to use
with the computer (e.g. keyboard and mouse) to
their ports.
5. Attach the AC/DC adapter to the DC-In jack on the
right of the computer, then plug the AC power
cord into an outlet, and connect the AC power
cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable
viewing angle (do not to exceed 135 degrees); use
the other hand (as illustrated in
support the base of the computer (Note: Never lift
the computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system
software pre-installed. Where this is not the
case, or where you are re-configuring your
computer for a different system, you will find
this manual refers to Microsoft Windows 10.
Figure 1 - Opening the Lid/LCD/Computer with
AC/DC Adapter Plugged-In
4
Figure 1) to

Shut Down
Note that you should always shut your
computer down by choosing the Shut
down command in Windows (see be-
low). This will help prevent hard disk or
system problems.
1. Click the Start Menu icon
2. Click the Power item .
3. Choose Shut Down from the menu.
°
135
.