Binding Of The 2.4 Ghz System - Carson Agusta Westland Grand Mode D'emploi

e. Binding of the 2.4 GHz System
1. Press the button for frequency bind, then turn on the transmitter's
power.
3. If the frequency bind is successful, the indicator light will
extinguish.
2. Connect the plug of the flight controller to the receiver. The LED
will flash. Then connect the binding plug on the battery terminal of
the receiver.
4. Press the frequency bind button again to get it rebound.
The transmitter gets into normal working mode again.
5. Disconnect the binding plug again. The LED will remain lit for a few
seconds. The RC system will revert to normal operation.
CARSON Helicopter Agusta Westland Grand
GB
31