Introduction; Intended Use; Items Supplied / Parts Description - FLORABEST FRWS 9 A1 Notice De Montage

Introduction

GB

Intended use

Items supplied / Parts description

Figure A:
1 Crown drill bit
1 Flange for downpipe sizes 70-80 mm
1 Flange for downpipe sizes 90-110 mm
2 Flange gaskets
1 Rubber seal for the hole in the rainwater barrel (DN 19/32)
1 Clamping device
1 Rainwater collector with control valve and fi lter insert
1 Connection hose
Figure B:
with overfl ow protection
with sommer-/winter operation
Suitable for all vertical downpipes DN 70 - 110 mm
14
Congratulations!
With your purchase you have decided in favour of a quality product. Familiarise
yourself with the product before installation and before taking it into use for the
fi rst time. In this regard, please read the following assembly instructions attentively.
Use this appliance only as described and only for the specifi ed areas of applica-
tion. Retain these instructions for future reference. In addition, pass these documents
on, together with the product, to any future owner.
This rainwater collector is intended for installation in a vertical downpipe. There it
collects rainwater fl owing from the roof water and directs it to a rainwater barrel.
It can be used for roof areas of up to about 80 m² in size. This rainwater collector
can be installed on standard rainwater downpipes made of metal or plastic with
diameters from 70 - 110 mm. The rainwater collector is intended solely for domestic
use. This appliance is not intended for any other use or for uses beyond those
detailed. Claims of any kind for damage resulting from unintended use will
not be accepted. The user alone bears liability.
FRWS 9 A1