Krups KA990T41 Mode D'emploi page 29

The appliance does not work. The plug is not inserted cor-
The appliance stops during
operation.
The blender blades do not
rotate freely.
Leak at the bottom of the
blender.
Your juice extractor attach-
ment "vibrates".
The TIMER function does not
work.
n You can customise your appliance and purchase the following accessories from your usual retailer or
from a KRUPS approved service centre:
- Metal bowl
- Storage lid
- Bowl cover
- Stainless steel blender
- Glass blender
- Mincer attachment
If you have any product problems or queries, please contact our Customer Relations Team first for expert
help and advice:
0845 330 6460 - UK
(01) 677 4003 - ROI
Or consult our web site: www.krups.co.uk
rectly.
An accessory is not positioned
correctly.
A message flashes
Overload.
A message flashes
You have allowed your appliance
to operate too long (more than
16 min). The programmed time
has elapsed.
A message flashes
.
Pieces of food too large or too
hard
The seal (d2) is not correctly po-
sitioned.
The removable blade assembly
(d1) is not correctly fitted.
There is too much pulp in the
container (j2).
Your appliance is running.
- Mini-chopper
- Grinder
- Sausage filler tube
- Blade
- Kneading hook
- Mixing blade
Connect the appliance to a socket with
the correct voltage.
Refer to section
Check that the cover (a6), (a8) or (b2)
and the accessories are correctly as-
sembled and positioned.
Refer to section
Remove some of your ingredients, etc.
Allow your appliance to cool down for
a few minutes.
Return the speed control knob (a1) to
0. Leave the appliance to cool down
for a few minutes and restart the ap-
pliance.
Reduce the size of the pieces or the
quantity of food.
Add liquid.
Reposition the seal (d2) on the remo-
vable blade assembly (d1) and fit it on
the jug (d3).
Empty the container (j2).
Refer to section 5.
To programme an operating time, the
appliance must be stopped.
- Balloon whisk
- Juice extractor
- Vegetable cutter
- Pasta rolling mill
- Pasta dies
- Pasta dryer