Kenwood M-9000S Manuel D'instructions page 58

21. Setup wizard
You can start the setup wizard again in the "Setup wizard" menu. To do this, proceed as described
under "3.8 Starting the setup wizard".
22. Info
In this menu you will find the version number of the current firmware, among other things. Have this
ready if you want to contact customer service.
23. Privacy policy
Please read the data protection regulations listed there or go to this website:
www.frontiersmart.com/privacy
24. Backlight
The display illumination can be programmed in 3 brightness levels. The following settings can be
made in the "Backlight" menu:
"Timeout": Time until the display is set to the "Dim level" lighting level.
Choices: "On / 10 / 20 / 30 / 45 / 60 / 90 / 120 / 180 seconds"
"ON" means that the radio always remains in the brightness level of the "On setting".
"On level": Brightness of the display when the radio is switched on.
Choices: "High" / "Medium" / "Low"
"Dim level": Brightness adjustment for operation and standby.
Choices: "Medium" / "Low" / "Night" / "Off"
26