Publicité
Les langues disponibles
Les langues disponibles
English
nOTE: The state of charge indicator is only an indication
of the charge left on the battery. It does not indicate tool
functionality and is subject to variation based on product
components, temperature and end-user application.
Fig. D
12
Extendable Crevice Tool
1. To extend the crevice tool
vacuum nozzle
3
until it clicks in place.
2. To collapse the crevice tool
nozzle
until it clicks in place.
3
Attaching Motorized Brush (Fig. G)
CAUTION:
off when the motorized brushis attached or detached.
nOTE: Do not use directly on pets.
1. Slide the vacuum nozzle
motorized brush
.
10
2. Ensure that the plastic retaining tabs
the recesses
13
. An audible click will be heard.
Fig. E
3
13
Removing Motorized Brush
CAUTION:
off when the motorized brush is attached or detached.
1. Pull the the plastic retaining tabs
from the recesses
13
.
2. Pull the vacuum nozzle
3
Dry pick up
For everyday spills of dry material.
-
Do not fill the dust bowl
the filter.
4
2
4
, pull it out from the
4
, push it into the vacuum
The unit needs to be switched
into the opening of the
3
engage with
12
10
12
The unit needs to be switched
outward, away
12
from the motorized brush
10
beyond the end of
5
Optimizing the suction force
In order to keep the suction force optimized, the filters must
be cleared regularly during use.
Emptying and cleaning the product.
Removing the dust bowl and filter (Fig. E, F)
WARNING:
should be cleaned regularly.
1. Hold the dust bowl over a trash can before pressing the
dust bowl release button
access door
as shown in figure E.
11
2. While holding the dust bowl over a trash can, lightly
shake it to empty the dust bowl
3. Lift the prefilter
out of the dust bowl
12
in figure F.
4. Lift the filter
out of the dust bowl
13
5. While holding the dust bowl over a trash can, empty the
dust bowl
.
5
6. Install the filter
into the dust bowl
13
the prefilter
into the dust bowl
12
7. Close the dust bowl access door
into place.
WARNING:
without the filters. Optimum dust collection will only
be achieved with a clean filter.
Fig. E
11
Fig. F
13
5
.
Cleaning the dust bowl and filter
The prefilter
12
and filter
soapy water. The dust bowl
dry cloth.
1. Make sure the filter
13
dust bowl
5
are dry before installing.
The filter is reusable and
to release the dust bowl
6
.
5
as shown
5
.
5
, then install
5
.
5
until it clicks firmly
11
Never use the appliance
6
7
13
can be washed in warm
5
can be wiped clean with a
, prefilter
12
and the
Publicité
