Publicité
Les langues disponibles
Les langues disponibles
Battery charge status cannot be displayed while the control switch is
pressed.
3.4 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
3.5 Items supplied
(Hammer) drill / driver, operating instructions.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Other system products approved for use with
this product can be found at your local Hilti Store or at: www.hilti.group
4
Technical data
4.1 Technical data
Rated voltage
Weight in accordance with EPTA
procedure 01
Speed
Torque (soft joint)
Torque range (15 settings)
Keyless chuck clamping range
Ø drill bit (softwood)
Ø drill bit (hardwood)
Ø drill bit (metal)
26
English
Printed: 19.09.2019 | Doc-Nr: PUB / 5509391 / 000 / 01
SF 2-A12
10.8 V
1.1 kg
1st gear
0 /min ...
400 /min
2nd gear
0 /min ...
1,560 /min
≤ 21 Nm
0.5 Nm ... 5 Nm
0.8 mm ...
10 mm
0.8 mm ...
14 mm
0.8 mm ...
10 mm
0.8 mm ... 6 mm 0.8 mm ... 6 mm
2235269
SF 2H-A12
10.8 V
1.2 kg
0 /min ...
400 /min
0 /min ...
1,560 /min
≤ 21 Nm
0.5 Nm ... 5 Nm
0.8 mm ...
10 mm
0.8 mm ...
14 mm
0.8 mm ...
10 mm
*2235269*
Publicité
