Hilti SF 2H-A12 Mode D'emploi page 30

2.3 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
2.4 Additional safety instructions
Personal safety
▶ Use the product only when it is in perfect working order.
▶ Never tamper with or modify the tool in any way.
▶ Do not look directly into the light source (LEDs) integrated in the drill/driver
and do not direct the light at other persons' faces. This presents a risk of
dazzling or eye damage.
▶ Avoid touching rotating parts. Switch the power tool on only after bringing
it into position at the workpiece. Touching rotating parts, especially
rotating accessory tools, may lead to injury.
▶ Wear protective gloves also when changing the accessory tool. Touching
the accessory tool presents a risk of injury (cuts or burns).
▶ Always hold the tool securely by the grip. If the accessory tool (e.g. the
drill bit) sticks and stalls, the power tool, due to its high torque, may
tend to rotate about its own axis in the direction opposite to that of the
accessory tool.
▶ Make sure that the workplace is well ventilated and, where necessary,
wear a respirator appropriate for the type of dust generated. Contact with
or inhalation of the dust may cause allergic reactions and/or respiratory
or other diseases to the operator or bystanders. Certain kinds of dust
are classified as carcinogenic such as oak and beech dust, especially
in conjunction with additives for wood conditioning (chromate, wood
preservative). Material containing asbestos may be handled only by
specialists.
▶ Take breaks and exercise your fingers to improve the blood circulation.
Exposure to vibration during long periods of work can lead to disorders
of the blood vessels and nervous system in the fingers, hands and wrists.
24 English
Printed: 19.09.2019 | Doc-Nr: PUB / 5509391 / 000 / 01
2235269
*2235269*