LENCO LS-300 Mode D'emploi page 7

Re-mark: The LS-300/301/310 will go automatically in standby position if there is no audio signal (record or Bluetooth)
during 20 minutes (+/-5 minutes). To wake up from this Stand-by position, you should press the Power On/Off switch
twice (OFF and ON again).
In Bluetooth mode, to avoid that the LS-300/301/310 is switching off after 20 minutes (for energy saving (ERP2 directive)),
you better put the volume of your smartphone or tablet (streaming music to the turntable) at maximum and control the
volume with the rotating button of the turntable.
"This product has a bluetooth reception function, you can not transmit any bluetooth sound with it: this
means that you can receive wirelessly a bluetooth sound signal from an external source like a smartphone."
Lenco
Turntable
Type
Drive Motor
Speed
Wow and flutter
Turntable platter
Cartridge
Type
Stylus
Optimum Tracking force
Output
Frequency response
Crosstalk
Signal-to-noise ratio(S/N)
General
ADAPTOR
PRODUCT
Audio Output (Line Out)
Power Consumption
Dimension
Weight
Power supply adaptor
Manufacturer: Dongguan Liyang Electrical Technology Co., Ltd
Model number: LY024SPS-120200Z
Use only the power supply listed in the user instructions
LS-300/301/310
Belt drive full manual
DC motor
33 1/3 rpm, 45 rpm
≤0.35%
300mm
N-40/Audio Technica AT3600
0.6 mil
3.5 grams
2.5mV±3dB 1KHz
0dB±3dB 10KHz
18dB or more 1KHz
40dB
input AC100-240V~50/60Hz 1.2A
output DC12V-2A
DC12V-2A
400-600mv
24W
424x331x160mm for main unit; 140x177x230mm for speaker
approx.6.9KGS LS-300/301/310
7