Publicité
Les langues disponibles
Les langues disponibles
•
a minor channel number
Note
Example: Channel 5-1. The "5" is the major
channel number and the "1" is the minor channel
number.
•
In the US, in most locations the major
channel number is the same for both analog
and digital channels (It is equal to the NTSC
channel number for existing broadcasters.)
•
In the US, a minor channel number of zero is
used for a broadcaster's analog channel.
Channel Numbering Example
•
Original NTSC channels for Des Moines, IA:
5, 8, 11, 13, and 17.
•
Possible NTSC + ATSC channels for Des
Moines, IA: 5-0, 8-0, 11-0, 13-0, and 17-0
(channel numbers for existing analog
channels) and 5-1, 5-2, 8-1, 8-2, 8-3, 8-4,
and 13-1 (channel numbers for digital
channels).
Controlling the sound
Using the VOL+ and VOL- buttons
Press:
•
VOL+ to increase the volume.
•
VOL- to decrease the volume.
Using the MUTE button
To mute the sound:
•
Press MUTE on the remote.
To resume the sound:
•
Press MUTE on the remote.
-OR-
Press VOL+.
Note
If you mute the sound, the color of VOLUME
displayed on the screen turns red. After resuming
the sound, the color of VOLUME displayed on the
screen turns green.
Setting up Stereo/SAP broadcasts
This television can receive MTS stereo programs
and any SAP (Secondary Audio Program) that
may accompany the stereo program. This type
of signal is available only from analog
channels.You can select Stereo or SAP only
when the station transmits these signals. Mono
sound is automatically received if the broadcast
is only in monophonic. You can also select
MONO if you are having difficulty receiving a
stereo signal.
Selecting the MTS mode
To select the MTS mode:
•
Press MTS/SAP repeatedly to select the
MTS mode.
10
Adjusting the picture
To adjust the picture:
1 With the television turned on, press MENU to
display the main menu.
2 Press
3 Press
4 Press
5 Press
Setting
Contrast
Brightness
Color
Tint
Sharpness
Selecting a picture mode
There are three preset picture modes (Standard,
Dynamic, and Soft) and one user-set picture
mode (Personal).
To select a picture mode:
1 Press PICTURE on the remote control.
2 Select from one of the following:
•
•
•
•
Changing picture size
You can change the picture size (aspect ratio)
according to your video signal type or personal
preference. This can only be done in DTV mode
when the video signal type is in 16:9 format.
To change the picture size:
Press ZOOM to select the desired picture size
(aspect ratio). You can select between NORMAL
and ZOOM.
www.insignia-products.com
Insignia NS-F27TV Television
or
to select PICTURE.
or
to enter the Picture menu.
or
to select a setting to adjust.
or
to adjust the setting.
Press
Press
weaker
stronger
darker
lighter
paler
deeper
purplish
greenish
softer
sharper
STANDARD—Select for a normal picture.
DYNAMIC—Select for a bright and
dynamic picture.
SOFT—Select for a finely detailed picture.
PERSONAL—Select to create your own
picture mode.
Publicité
