AKG EMOTION Série Mode D'emploi page 4

1 Description
1.1 Features
See fig. 1 (p. 14).
1.2 Brief
Description
See figs. 2 and 3
(p. 14).
1.3 Accessories
2 Wiring
2.1 Precaution
2.2 Connecting
to Microphone
Inputs
4
• Rugged all metal body with stainless steel
wire-mesh cap.
• Hypercardioid polar pattern for high gain be-
fore feedback.
• Integrated, easy to clean wind and pop screen.
• ON/OFF switch.
• Matte black finish prevents distracting light re-
flections on stage.
The D 660 S dynamic microphone has been spe-
cifically designed for vocal use on stage as well as
Karaoke and home recording applications. Neu-
tral low and mid frequency response and a 6 dB
presence boost between 4 kHz and 8 kHz provide
a neutral sound and good intelligibility.
Standard: SA 44 stand adapter
Optional: MK 9/10 microphone cable; ST 1,
ST 12, ST 45, ST 102A, ST 200 microphone
stands; W 23 windscreen; H 30 shock mount
Please make sure that the piece of equipment
your microphone will be connected to fulfills the
safety regulations in force in your country and is
fitted with a ground lead.
The microphone features a balanced output on a
3-pin male XLR connector.
You can connect the microphone either to a
balanced (see fig. 4 on page 15) or an unbalanced
microphone input (see fig. 5 on page 15).