Klarstein GRANDBREEZE ECO 12K Mode D'emploi page 51

TROUBLESHOOTING
Problem
The unit does not start
when the On/Off button is
pressed.
The unit does not cool
properly.
The unit is very loud.
There is an unpleasant
smell in the room during
operation.
Possible cause
The water level indicator
light flashes because the
water tank is full.
The room temperature
is higher than the set
temperature (electric
heating mode).
The room temperature
is lower than the set
temperature (cooling
mode).
The doors or windows
have not been closed
properly.
There are heat sources in
the room.
The exhaust hose has
not been connected or is
blocked.
The temperature setting is
too high.
The air inlet is blocked.
The floor of the site is not
level or flat enough.
The noise is caused by
the refrigerant circulating
inside the fan.
The air filter is dirty.
Suggested solution
Empty the water from the
water tank.
Reset the temperature
setting.
Reset the temperature
setting.
Make sure all doors and
windows are closed.
If possible, remove the
heat sources.
Connect or clean the hose.
Reset the temperature
setting.
Clean the air inlet.
If possible, place the unit
on a flat, level surface.
This is normal.
Clean the air filter.
EN
51