Télécharger Imprimer la page

GreenWorks PS82210 Manuel D'opérateur page 12

Élagueuse sur perche

Publicité

Les langues disponibles

Les langues disponibles

EN
• the inside of the guide bar is worn and makes the
chain lean to one side.
10
TRANSPORTATION AND STORAGE
Before you move the machine, always
• Remove the battery pack from the machine.
• Keep hands clear of the lock-out button.
• Put the scabbard on the guide bar and the chain.
Before you put the machine into storage, always
• Remove all residual oil from the machine.
• Remove the battery pack from the machine.
• Clean all unwanted material from the machine.
• Make sure that the storage area is
• Not available to children.
• Away from agents which can cause corrosion,
such as garden chemicals and de-icing salts.
11
TROUBLESHOOTING
Problem
The machine
does not start.
The bar and
chain gets hot
and smokes.
Possible cause Solution
Assemble the
The poles are
poles according
not assembled
to the instruc-
correctly.
tions.
1.
Push and
hold the
lock-out
button
2.
While you
The lock-out
hold the
button and trig-
lock-out
ger are not de-
button, pull
pressed at the
the trigger.
same time.
3.
Release
the lock-
out button
to start the
machine.
Oil tank is emp-
Fill the oil tank.
ty.
1.
Remove
the battery
pack.
The discharge
2.
Remove
port is blocked.
dirt from
the dis-
charge
port.
English
Problem
The bar and
chain gets too
hot and cannot
cut.
The motor runs,
but the chain
does not cut
correctly, or the
motor stops af-
ter around 3
seconds.
12
Possible cause Solution
1.
Clean the
oil tank.
Inlet opening of
2.
Fill with
inner oil tank is
clean bar
blocked.
and chain
lubricant.
The sprocket is
1.
Clean the
stuck and clog-
sprocket.
ged with debris.
2.
Fill with
clean bar
and chain
lubricant.
Refer to Adjust
The chain ten-
the Chain Ten-
sion is too tight
sion in the man-
or too loose.
ual.
Sharpen or re-
The chain is dull
place the chain.
Take out the
The chain is put
chain and turn it
on backwards.
in the right di-
rection.
1.
Release
When you use
the trigger.
the machine un-
2.
Start the
der load, it
machine
stops.
again.
Lubricate the
The chain is not
chain to de-
lubricated.
crease the fric-
tion.

Publicité

loading