Carton Inventory; Installation Hardware - Chamberlain Liftmaster Professional Security+ 1265Lmc Manuel Du Propriétaire

Carton Inventory

Your garage door opener is packaged in two cartons which contain the motor unit and all parts illustrated below.
Accessories will depend on the model purchased. If anything is missing, carefully check the packing material.
Parts may be stuck in the foam. Hardware for installation is also listed below.
Multi-Function
Door Control Panel
Light Lens (2)
Chain
Pulley Bracket
Safety Sensor
Bracket (2)

INSTALLATION HARDWARE

Hex Screw 5/16"-18x7/8" (4)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
Screw 6-32x1" (2)
Self-Threading Screw 1/4"-14x5/8" (2)
SECURITY✚
3-Channel Remote Control
Door Bracket
2 Conductor Bell Wire
White & White/Red
Trolley
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
Remote Control
Transmitter Visor Clip
Chain
One-Piece
T-rail
Header Bracket
Safety Labels
and
Literature
Insulated Staples (30)
Ring Fastener (3)
Dry Wall Anchors (2)
Rope
Handle
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
5
Sprocket Cover
Styrofoam
Curved Door
Arm Section
Straight Door
Arm Section