Xo XOP30SC Mode D'emploi page 17

installation "2"
• Mounting the hood on the wall:
Position the fixing template on the wall Fig.B (considering the recommended distance from
the cooker top).
- Fix the 2 upper screws A without tightening them completely along with the plugs Fig.A.
- Hang the hood on the wall, aligning it in a horizontal position and tighten/fasten the 2 screws
A. When it has been regulated, fix it definitively using the 2 safety screws B (Fig.A).
For the various installations use screws and screw anchors suited to the type of wall (e.g.
reinforced concrete, plasterboard, etc.). If the screws and screw anchors are provided with
the product, check that they are suitable for the type of wall on which the hood is to be fixed.
• Limited to installation on plasterboard walls: make sure that the screws are fixed to the wall
support elements. If this is not the case, install a support structure made up from 2 by 4 inch
cross members in correspondence with the screw anchorage points.
A
A
B
B
A
- 17 -
2
A
A
B
B
B
B
A
A