Safety Instructions For Maintenance; Operation - RedMax CA-EX230 Manuel D'utilisation

1. Ensure that the guard is undamaged and is not
cracked.
2. Replace the guard if it has been exposed to impact
or is cracked.

Safety instructions for maintenance

WARNING: Read the warning instructions
that follow before you do maintenance.
WARNING: Always stop the engine before
you work on any part of the attachment. It
can continue to move even after the throttle
is released. Ensure the accessory has
stopped completely and disconnect the HT
leads from the spark plug before you start to
work on it.
• Cultivating should only be done in daylight or other
well-lit conditions.
• Check the entire product before starting. Replace
damaged parts. Check that there are no fuel leaks
and that all guards and covers are complete and
fastened securely. Check all nuts and screws.
• Check that the blades are undamaged and show no
signs of cracking or other damage. Replace the
blades if necessary.
To start the product with a cold engine
1. Run the basic product warm and then shut down the
product.
410 - 003 - 23.01.2020
• Make sure the cutter guard is fitted and not
damaged.
• Check that the tines and tine guard are secured
correctly. Make sure the direction of rotation agrees
with the cutters and on the gear. The arrows must
point in the same direction.
• Check that the blades do not move when the engine
is idling.
• Make sure the handle and safety features are in
order. Never use a product that has any parts
missing or has been modified in relation to the
specification.
• Only use the product for the purpose it was intended
for.
• Make sure the cutting attachment has stopped
before cleaning, carrying out repairs or an
inspection. Disconnect the spark plug cap from the
spark plug.
• Wear heavy-duty gloves when repairing the
cultivator.
• Use only original spare parts for repairs.
• Store the product out of reach of children.

Operation

2. Mount the accessory as per the assembly
instructions.
7