Agri-Fab 45-0326 Notice D'utilisation page 8

For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
4. (Figure 11) Turn the second rear hopper tube so that
the brace holes in the middle of the tube face up.
Assemble the ends of the rear hopper tube onto the
ends of the lower hopper side tubes. Fasten together
using plastic plugs.
REAR HOPPER TUBE
(brace holes on top)
PLASTIC PLUG
LOWER
HOPPER
SIDE TUBE
5. (Figure 12) Place the assembled lower hopper tubes
into the bottom of the hopper bag
6. (Figure 12) Attach the ends of the lower hopper side
tubes to the inside of the upper hopper side tubes
using two 3/8" x 1/2" clevis pins (P) inserted from the
inside, and two 3/32" hair cotter pins (O).
UPPER HOPPER
LOWER HOPPER
SIDE TUBE
11
12
SIDE TUBE
3/32" HAIR
COTTER PIN (O)
3/8" x 1/2"
CLEVIS PIN (P)
HOPPER BAG
BOTTOM
www.mymowerparts.com
ENGLISH
7. (Figure 13) Insert the bag frame strap into the
stitched sleeve along the front edge of the bag
bottom.
8. (Figure 13) Assemble the bag frame strap to the
lower hopper side tubes using two 1/4" x 1-1/8"
clevis pins (Q) and 3/32" hair cotter pins (O).
BAG FRAME STRAP
1/4" x 1-1/8"
CLEVIS PIN (Q)
9. (Figure 14) Secure the bag corners around the lower
hopper side tubes by snapping the bag flaps to the
bag bottom on both sides.
SNAP
FIGURE 14
8
13
3/32" HAIR
COTTER PIN (O)
14
FLAP