Agri-Fab 45-0326 Notice D'utilisation page 7

For Agri Fab Discount Parts Call 606-678-9623 or 606-561-4983
11. (Figure 8) Position the height adjustment handle
side to side so that the tooth lock washer (M) can fit
between the handle and the height adjustment strap.
Tighten the nuts securing the height adjustment
handle.
12. (Figure 8) Insert the 5/16" x 3/4" carriage bolt (E)
through the height adjustment handle. Assemble
onto the bolt, in order, the 5/16" tooth-lock washer
(M), the height adjustment strap, a 5/16" flat washer
(J) and the plastic knob.
5/16" FLAT
WASHER (J)
PLASTIC
KNOB
TOOTH LOCK
WASHER (M)
ENGLISH
8
5/16" x 3/4"
CARRIAGE BOLT (E)
www.mymowerparts.com
ASSEMBLY OF HOPPER BAG
1. (Figure 9) Turn a rear hopper tube so that the
brace holes in the middle of the tube face down.
REAR HOPPER TUBE
(brace holes on bottom)
2. (Figure 10) Insert the two upper hopper side tubes
through the stitched flaps on each side of the
hopper bag.
3. (Figure 10) Assemble the ends of the rear hopper
tube onto the ends of the upper hopper side tubes.
Fasten together using plastic plugs (Z).
7
PLASTIC PLUG (Z)
UPPER HOPPER
SIDE TUBE
9
10