LED Indicators
Once the camera is connected to the network, the Connection Status
LED will display the camera's progress in connecting to the Network
Video Management software.
The following table describes what the LEDs indicate:
Table:LED Indicators
Connection
State
Obtaining IP
One short
Address
flash every
second
Discoverable Two short
flashes every
second
Upgrading
Two short
Firmware
flashes and
one long flash
every second
Connected
On
12
Connection
Status LED
Attempting to obtain an IP address.
Obtained an IP address but is not
connected to the Network Video
Management software.
Updating the firmware.
Connected to the Network Video
Management software.
Description