Publicité
Les langues disponibles
Les langues disponibles
Reset to Factory Default
Settings
If the camera no longer functions as expected, you can choose to
restore the camera to its factory default settings.
Use the firmware revert button to reset the camera.
Firmware Revert Button
Figure: The firmware revert microswitch on the side of the dome
camera.
1.
Disconnect power from the camera.
2.
Using a straightened paperclip or similar tool, gently press
and hold the firmware revert button.
3.
While continuing to hold the button, power the device.
Release the button after three seconds.
Caution — Do not apply excessive force. Inserting the tool
too far will damage the device.
13
Publicité
