Publicité
Les langues disponibles
Les langues disponibles
Installation
Required Tools and Materials
•
Small slotted screwdriver with 5/64" or 2 mm blade width
— for connecting power when not using Power over
Ethernet.
Camera Package Contents
Ensure the package contains the following:
•
Avigilon High Definition IP Dome Camera
•
Terminal block
•
T20 TORX tamper resistant key
•
Hole template sticker
Installation Steps
Complete the following procedures to install the dome camera.
1.
Removing the Dome Cover on page 4
2.
Mounting the Dome Camera on page 5
3.
Connecting Cables on page 6
4.
Assigning an IP Address on page 6
5.
Accessing the Live Video Stream on page 7
6.
Aiming the Dome Camera on page 7
7.
Installing the Dome Cover on page 8
8.
Focusing the Dome Camera on page 8
Removing the Dome Cover
Remove the dome cover by loosening the tamper-proof screws that fix
the cover to the base. The tamper resistant key included with the
dome camera can be used to loosen the screws.
NOTE: Be careful not to scratch the dome bubble.
4
Publicité
