Avigilon 1.0-H3-DC2 Guide D'installation page 11

Front View
Tilt Lock Thumb Screw
Pan Lock Thumb
Screw
I/O Terminals
Feature
Tilt Lock Thumb
Screws
Pan Lock Thumb
Screws
Azimuth Control
Ethernet Port
Power Connector
Block
Audio/Video
Connector
I/O Terminals
Connection Status
LED
Link LED
Description
Provides a locking mechanism for the image tilt
adjustment.
Provides a locking mechanism for the image pan
adjustment.
Provides adjustment of the image angle.
Accepts an Ethernet connection to a network. Server
communication and image data transmission occurs over
this connection. Also receives power when it is
connected to a network that provides Power over
Ethernet.
Accepts a terminal block with either AC or DC power
connection. DC input can be either polarity. Only required
when Power over Ethernet is not available.
Accepts a mini-jack connector (3.5 mm). See the section
about connecting microphones and monitors for more
information.
Provides connections to external input/output devices.
See the section about connecting external devices for
more information.
Provides information about device operation. See LED
indicators for more information.
Indicates if there is an active connection in the Ethernet
port.
Azimuth Control
Link LED
Connection Status
LED
Ethernet Port
Power Connector Block
Audio/Video Connector
3