Télécharger Imprimer la page

Atag KA2011LPUU/A01 Mode D'emploi page 31

Publicité

Les langues disponibles

Les langues disponibles

Installation
Where to install
1. Place your appliance where it is easy to use.
Select a good
location
2. Avoid placing the unit near heat sources, direct sunlight or moisture.
3. Air must circulate properly around your appliance to ensure efficient operation.
4. To avoid vibrations, the appliance must be leveled.
5. Don't install the appliance below
This appliance contains fluid (refrigerant, lubricant)and is made of parts and materials
Disposal of the
old appliance
which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material
and can be reused after rework (recycling). For take back, please contact with the
local agency.
31
If your appliance is built in, no space necessary on top and allow 0,5 cm space on
left and right side. The appliance should be elevated 1 inch (2.5 cm) from the floor,
especially if it is carpeted.
5∞C. It may cause affect the performance.

Publicité

loading

Ce manuel est également adapté pour:

Ka2011lpuu/a02Ka2011lpKa2011lpuu